18 / 148
B AT T E R Y M A N A G E M E N T
18
Specifications subject to change. See bluesea.com for current information.
Rear
Front
9003
e,
9004
e
*
e
-Series Battery Switches
350 Amps continuous rating for inboard gasoline
or diesel engines
Features
•
Tin-plated copper studs for maximum conductivity and corrosion resistance
•
Accepts up to 4/0 AWG (120 mm²) battery cables
•
Studs accept 3 ∕ 8" (M10) ring terminals
•
7∕ 8" (22 mm) stud length accepts multiple cable terminals
•
Blue Sea Systems one-piece terminal stud design never loosens over time
•
One-piece stainless flange nuts ensure safe and secure connections
•
Fits most Perko and Guest low amperage battery switch hole patterns
•
Case design allows surface or rear mounting options
•
Tactile indicator conveys knob position by feel
•
Icon Circuit Identification Label Kit available 7902 - sold separately (p. 129)
Specifications
9003 9001 , 5510
9004 9002 5511
11001
Cranking Rating:
10 sec.
2,000A 2,000A 1,000A
per circuit
Cranking Rating:
1 min.
1,000A 1,000A 750A
per circuit
Intermittent Rating:
5 min.
600A 600A 525A
per circuit
Continuous Rating
350A 350A 350A
per circuit
Voltage Max. Operating
48V DC 32V DC 32V DC
Regulatory
E
marked, ISO 8846,UL Listed - UL 1107 electric power switches
Meets American Boat and Yacht Council (ABYC) requirements
Meets UL 1500 and SAE J1171 external ignition protection requirements
IP66—protected against powerful water jets (see inside back cover)
Single Circuit ON-OFF
Switches a single battery to
a single load group
9001
e,
9002
e
*
Selector 4 Position
Switches isolated battery banks
to all loads or combines battery
banks to all loads
11001 *
Selector 3 Position
Switches isolated battery banks
to all loads
* Includes Alternator Field Disconnect
(AFD) which protects the diodes in the
alternator in the event of the switch
being switched to the OFF position while
the engine is running. If the AFD is not
used to protect the alternator, an LED
can be connected to the AFD terminals
to indicate when the battery switch is in
any position but OFF.
WARNING
The positive and negative conductors
should not be attached to the same
battery switch. The only exceptions are
the Dual Circuit Battery Switches, PN
6010 and 5510
e
. Since these models
have electrically isolated circuits and do
not include a combine feature, they can
provide disconnect to the positive and
negative conductors simultaneously.
For the full list of specifications, see pages 20–21
5510
e
PATENTED
Dual Circuit
™
Simultaneously switches two
isolated battery banks or circuits.
May be used to switch the positive
and negative conductors for
required applications.
5511
e
PATENTED
Dual Circuit Plus
™
Simultaneously switches
two isolated battery banks or
combines battery banks to
all loads. CAN NOT be used to
switch positive and negative
conductors because of the
combine feature.
Circuit Identification Label Kit
p. 129
SI-ACR
p. 30
3.00"
76.20mm
3.85"
97.79mm
3.00"
76.20mm
3.85"
97.79mm
REAR
PANEL
MOUNT IN
3-5
/
8"
92mm
Ø HOLE
1.59"
40.39mm
3.097"
78.67mm
0.77"
19.56mm
Related Products
For the complete list
of battery switch operational
diagrams, see pages 136–137
Add-A-Battery
p. 31
INVERTER
CHASSIS
GENERATOR
PARALLEL
ENGINE1
BATTERY1 BATTERY2 BATTERY3
ENGINE
PORT
ENGINE
STARBOARD
ENGINE
MID
HOUSE
BOW
THRUSTER
WINDLASS
INVERTER GROUND
ENGINE4
ENGINE3
ENGINE2
Mounting Options
PN
Description
AFD*
5510
e
Dual Circuit™
-
5511
e
Dual Circuit Plus™
-
9001
e
Selector 4 Position
-
9002
e
Selector 4 Position
Yes
9003
e
Single Circuit ON-OFF
-
9004
e
Single Circuit ON-OFF
Yes
11001
Selector 3 Position
Yes